MINERVA MX2 Fire Detection Control Panels
MINERVA MX2 is one of a new generation of digital addressable fire alarm controllers that is based on MX Technology. It brings a host of system options and
benefits to both installer and end user.
It uses state-of-the-art multi-sensor virtual detection to expertly
protect personnel and property through varying
occupancy conditions.
One or two loops are provided as standard with each
loop supporting up to 250 devices. Two loop panels
can be expanded to four loops by adding a plug-in
XLM800 loop expansion card which increases the
number of devices supported to 1000.
Further expansion of the system is achieved by networking panels via a plug-in TLI800 MXNet network card. A networked system can support a maximum of 396 loops and 99,000 detectors.
All MX2 controllers share a common fully featured user interface allowing multiple access levels and providing complete system wide control. User interfaces that are spread over a networked system will operate seamlessly and function together as a single integrated unit. The fully functional repeater also provides a seamless user interface to the entire system and can be sited up to 1200m from a
controller.
Architecturally matching expansion boxes simplify the addition of what would normally be termed customised features. The expansion boxes can accommodate up to two add-on modules including the ANN840 a 40 way bi-colour LED display, ANN880 80 way LED display, COM820 20 way command button LED display or the PRN800 in-built thermal printer.
Features:
- EN54 Compliant MXDigital system
- Integral power supply
- Optional integral eighty way zonal LED’s
- One to four loops or network up to 396
loops
- 250 addresses per loop
- Full range of MX virtual multi-sensor
detectors
- MX FASTLOGIC fuzzy logic smoke
detection algorithms
- Fully functional repeater
- Powerful MXConsys & MXConsys Express
configuration software
- Easy to install
- Space for 17Ah or 38Ah batteries
|
