Home > Fire Detection > MINERVA > MZX Ancillaries & Modules > PSM800/PSM820 Power Supply


 

PSM800/PSM820 Power Supply

PSM800 PSU

The PSM800 Power Supply and Battery Charger can provide power for a wide range of ancillary devices and may be used as a primary or auxiliary power supply. It contains an integral battery charger which continuously charges back-up batteries. The PSM800M is the Marine version.

The Power Supply Module is a regulated 24V dc @ 5A, isolated switching power supply that operates from 120-240V ac @ 50/60Hz.

Features:

  • Power Factor correction and auto-adjusting input for universal 100/255V ac operation
  • Boost converter providing regulated +24V dc outputs
  • Short circuit protection and fault isolation
  • Manual or automatic output shutdown
  • Recharges batteries up to 110Ah (UL864)
  • Battery installation protection and battery wiring monitoring
    • Monitors battery charging voltage for low battery
    • Missing or reverse battery
    • Shorted battery wiring
  • Remote reset facility
  • Battery charger current limiting
  • Battery charger and fault voltage temperature compensation
  • Safe Extra low Voltage (SELV) outputs.
  • Supplies controller power - regulated 5V dc @ 3A.
  • Diagnostic LEDs for:
    • AC OK
    • Charger Fault
    • Battery Fault
    • Earth Fault

PSM820 PSU

The PSM820 Power Supply and Battery Charger can provide power for a wide range of ancillary devices and may be used as a primary or auxiliary power supply. It contains an integral
battery charger which continuously charges back-up batteries.

The Power Supply Module is a regulated 27.3V dc @ 5A, isolated switching power supply that operates from 120-240V ac @ 50/60Hz.

Features:

  • Power Factor correction and auto-adjusting input for universal 100/264V ac operation
  • Short circuit protection and fault isolation
  • Manual or automatic output shutdown
  • Recharges batteries up to 65Ah
  • Battery installation protection and battery wiring monitoring
  • Monitors battery charging voltage for low battery
  • Missing or reverse battery
  • Shorted battery wiring
  • Remote reset facility
  • Battery charger current limiting
  • Battery charger and fault voltage temperature compensation
  • Safe Extra low Voltage (SELV) outputs
  • Supplies controller power - regulated 5V dc @ 3A
  • Diagnostic LEDs for:
    • AC OK
    • Charger Fault
    • Battery Fault
    • Earth Fault
        
This product is available in the UK
This product is available in mainland Europe


Click here for
Brochures & Datasheets



To view the Fire Detection MX Technology catalogue section, please click HERE



Sorry, there are currently no brochures or datasheets available for this product.

Please log-in to view secure documents.

Log into the secure areas by clicking on the "Log-In" button at the top of the page and then use your TycoEMEA.com website username & password to gain access. For more information on log-in codes, please click here.

 

   

Home  |  About Tyco  |  Privacy Statement  |  Contact Us  
     
© 2010 Tyco International. All Rights Reserved