The LIM800 Line Isolator Module is designed to be used on the MX addressable controller loop circuits. It monitors the line condition and when detecting a short circuit will isolate the affected section whilst allowing the rest of the addressing circuit to function normally.
The purpose of the LIM800 Line Isolator Module is to ensure that, on a looped addressable system, no short circuit fault can disable more detection devices than would be lost on a conventional non-addressable fire circuit and to meet the requirements of BS5839 Pt 1.
The LIM800 Line Isolator Module is contained on a double
sided Printed Circuit Board (PCB) which may be fitted into a
custom built fascia plate or may be fitted to an ANC-8 ancillary
housing. The fascia plate is then fitted onto a standard dual-gang
MK box. The LIM800 is designed for internal applications. The
LIM800 may also be ordered already fitted to the facia plate.
A LIM800 Line Isolator Module must be used between
theoretical zones to ensure compliance with BS 5839 : Part 1.
To view the Fire Detection MX Technology catalogue section, please click HERE
Sorry, there are currently no brochures or datasheets available for this product.
Please log-in to view secure documents.
Log into the secure areas by clicking on the "Log-In" button at the top of the page and then use your TycoEMEA.com website username & password to gain access. For more information on log-in codes, please click here.
