The BDM800 Beam Detector Module is designed to interface the MINERVA FireRay 50R/100R/2000 Beam Detectors to the MX Digital Addressable Loop. The BDM800 provides power from the loop, monitors the Fire and Fault Relay Contacts of the detector and also monitors the wiring to the detector for open and short circuit faults.
The BDM800 can be used to power the complete MINERVA FireRay 2000 system (via the loop) or just the control and receiver units with a second BDM800 used to power the transmitter unit. Up to fourteen BDM800’s driving MINERVA FireRay 50R/100R reflective beam detectors can be connected to a single loop.
Features:
Powers Beam Detectors directly from the MX Digital Loop
Reduces wiring and installation costs
Monitors Beam Detectors for Fire and Fault
Monitors interconnections for open and short circuit faults
LPCB and VdS Approved
Can be installed to BS5839 Part 1:2002
Onboard LED indicates polling and activation
May be used with the MINERVA FireRay 50R and 100R
reflective beam for greater savings on installation
Compatible with the MINERVA FireRay 2000 beam
detector
Optional BTM800 beam termination module to further
simplify installation
Supplied fitted to a standard double gang ancillary front
cover
